To work out the equity in your home, subtract what you owe from what the property is worth. CommBank puts it that way: equity is the difference between the value of your property and the amount you owe on your home loan. The sum is simple. The two numbers that go into it are where mistakes creep in, and the answer you can actually borrow against is a different, smaller figure. This guide takes each input in turn, then shows how a change in value moves the result.
The four-step sum: how to work out the equity in your home
Four inputs and a subtraction give you both numbers a lender cares about, your total equity and the part of it you can use.
Value, less what you owe, is where the equity sum starts.
Step 1: decide which value to use
CommBank says that to find out how much equity you have, you may need to get a property valuation, and its worked example starts with a home valued by the bank. A lender decides how much you can borrow against your home using its own valuation, so an online estimate or an agent’s appraisal is a starting point and not the figure the lender will use.
Because the lender’s figure may land above or below your guess, work with a range. Take the value you expect, then work out the equity in your home again at 5% and 10% below it. If the plan still works at the lower numbers, it is sturdier than a plan that needs your best-case value.
Step 2: find your loan balance
Use today’s balance, not the amount you borrowed. Add up every loan secured on the property: the main loan, any split portions and any line of credit. Your latest statement or online banking shows the figure, and your lender can confirm it.
Step 3: subtract to get your total equity
Here is a home valued at $850,000 with $520,000 still owing. The figures are an illustration, not a valuation.
Total equity
Calculation: $850,000 – $520,000
Result: $330,000
Equity as a share of value
Calculation: $330,000 / $850,000
Result: about 39%
Loan as a share of value
Calculation: $520,000 / $850,000
Result: about 61%
The last line has a name. Lenders call the loan as a share of the property’s value the loan-to-value ratio, or LVR. LVR and equity percentage are two ways of describing the same position, and they always add up to 100%. A home with 20% equity has an LVR of 80%.
Step 4: work out how much of your equity you can use
Total equity is not the amount you can borrow. CommBank says banks are generally comfortable lending up to 80% of the value of your home, minus the amount you owe the bank. On the example, 80% of $850,000 is $680,000, and $680,000 minus $520,000 leaves $160,000 of useable equity.
Whether you can borrow that much depends on more than the property. CommBank says it will depend on factors such as your income, living expenses and how much you owe, and that lenders mortgage insurance or a low deposit premium may apply depending on the amount you want to borrow and the valuation.
What a change in value does to the equity in your home
Usable equity moves faster than the value does, because the loan balance stays the same while 80% of the value rises and falls. This table runs the example at five values.
$765,000, 10% lower
Total equity: $245,000
Usable equity: $92,000
$807,500, 5% lower
Total equity: $287,500
Usable equity: $126,000
$850,000, as expected
Total equity: $330,000
Usable equity: $160,000
$892,500, 5% higher
Total equity: $372,500
Usable equity: $194,000
$935,000, 10% higher
Total equity: $415,000
Usable equity: $228,000
A change in the home’s value moves your equity even if the loan stays the same.
A 10% lower valuation cuts total equity by about 26% and usable equity by about 43%. That is why you should not plan around the top of your range. It also works in your favour when values rise, though growth is not guaranteed and varies from place to place.
Three homes, three different answers
The same sum gives very different results depending on how long you have owned the home and how much you borrowed. This table runs three homes through the steps above.
Bought two years ago with a small deposit
Value: $700,000
Loan balance: $620,000
Total equity: $80,000
Loan as a share of value: about 89%
Usable equity: none
The example above
Value: $850,000
Loan balance: $520,000
Total equity: $330,000
Loan as a share of value: about 61%
Usable equity: $160,000
Owned for many years
Value: $850,000
Loan balance: $200,000
Total equity: $650,000
Loan as a share of value: about 24%
Usable equity: $480,000
The first home shows why total equity can mislead. It has $80,000 of equity, yet nothing is usable, because 80% of its value is $560,000 and the loan is already above that. It would need either a value of $775,000 (the $620,000 loan divided by 0.8) or a loan paid down to $560,000 before any equity becomes usable. Compare the two: the home needs a rise of about 11% in value, or $60,000 of repayments.
The third home has the opposite position. Usable equity of $480,000 is not a sum to spend. How much of it you could carry depends on your income and living expenses, as CommBank notes, and every dollar borrowed against it adds to your repayments.
How equity grows
CommBank lists several ways to build equity:
- Increase the value of the property, for example by renovating.
- Reduce the loan balance by making more regular or larger repayments.
- Use an offset account, where money you put in is deducted from your loan balance for interest purposes, so you are charged interest only on the difference.
Repayments build equity slowly at first. On a $600,000 loan over 30 years at 6.2% (the RBA’s average for existing variable-rate owner-occupier loans, 6.2% in the most recent F6 data, to September 2026), you repay $7,097 of principal in the first year and $40,312 over the first five, because most of each early repayment is interest. The same pattern is why the first years of a loan add little equity unless you pay more than the minimum, or the property rises in value.
Before you ask your lender
- Work out your equity at a low, expected and high value, and keep all three.
- Write down the exact balance of every loan secured on the property.
- Decide what you would use the money for, because the purpose affects both the lender’s view and the tax treatment.
- Test whether you could carry the extra repayments, because CommBank notes that borrowing against your equity increases the total you owe and can result in higher monthly repayments.
- Ask the lender what valuation it will use and whether LMI or a low deposit premium could apply.
What equity is and what it is not
Even once you work out the equity in your home, it is not cash. To spend it you have to borrow it, by refinancing, topping up your loan or restructuring, and CommBank notes that doing so increases the total you owe and can result in higher monthly repayments. There may also be restrictions on your loan that prevent additional repayments or accessing the equity. Our page on
refinancing in Adelaide shows how the switch is costed in South Australia.
CommBank gives examples of what people use equity for: maintaining the home, a deposit for the next home or an investment property, investing, or a car or travel. A deposit or home maintenance goes into property you own. Spending on a car or travel leaves the debt in place after the money is gone. If you are weighing
using equity to buy an investment property, our guide works through the loan structure, the serviceability test and the tax rules.
Frequently asked questions
What is equity in a house?
The difference between the value of your property and the amount you still owe on your home loan, as CommBank describes it.
How do you calculate the equity in your home?
Subtract your current loan balance from the property’s value. With a $850,000 home and a $520,000 balance, the equity is $330,000.
What is usable equity?
The part of your equity a lender is generally comfortable lending against. CommBank says banks are generally comfortable lending up to 80% of your home’s value, minus the amount you owe.
Do I need a valuation to know my equity?
CommBank says you may need to get a property valuation, and its example starts with a bank valuation. A rough sum on an estimate is fine for planning, but the lender’s valuation sets the real figure.
How is equity different from LVR?
Equity is a dollar amount: value minus loan. LVR is the loan as a share of the value. At 20% equity, the LVR is 80%.
Can my equity go down?
Yes. Equity falls if the value of the property falls, and a given fall reduces usable equity by more in percentage terms than total equity, as the table above shows.
Can I access my equity without selling?
CommBank says you may be able to access equity by refinancing, borrowing additional funds or restructuring your loan. Whether you can depends on your income, living expenses and how much you owe.
Does paying extra off my loan build equity?
Yes. CommBank lists reducing your loan balance through more regular or larger repayments as a way to build equity.
Talk to us about your equity.
This article is general information only and does not take into account your objectives, financial situation or needs. The property values and loan balances are worked examples and are not valuations or offers. Using equity increases your debt and your repayments, and whether you can borrow against it is the lender’s decision.
Sources